MC50 4pcs Blade Mini Tobacco Cutting Machines Manual / Automatic
MC50 Mini Cutter is the new product that our company independently
developed. It combines the character and actual production
experience of the similar type, with high performance, high
technical content of roller knife type Mini Cutter, aiming at meet
the need of the small production and laboratory actual requirement.
1. Main purpose and scope
MC50 Mini Cutter applies to cut lamina/stem with the speed of
200-500kg/h in the pilot line or lab. To make the specification of
the processed lamina and stem conforms to the specified
requirements of the cigarette craft. The width of cutting is
adjustable at the range of 0.1-3mm easily.
MC50 Mini Cutter also applies to the vegetables cutting and
processing in the food processing production line with the speed of
500-1500kg/h. To make the specification of the processed vegetable
leaves conforms to the specified requirements of the craft. The
width of cutting is adjustable at the range of 0.1-6mm easily.
This cutter is wide scope, easy to use and maintain, with advanced
control function for cutting width, speed, material status, fault
display, manual and automatic control functions.
2. Basic parameter and main performance indexes
Knife door high
Knife door width
Knife roll rate
Supply gas pressure
3. Operating conditions:
1) Relative humidity: ≤80%
2) Ambient temperature: 10～40℃
3) Sea level elevation: ≤2000m
4) Power: 3N～50HZ, 380V±38V；50HZ±1HZ
5)Compressed air: Pressure ≥0.3MPa Flow≥0.2m3/min, after dry and
Tobacco: Stem conforms to the 5.5.2 regulations of the , comply
with the leaf conforms to the 6.2.2 regulations of the .
7) Metal flush trimmer should be set at the Feed End.
8) Operators shall take professional training, and can be
practically operate the machine according to the requirement
standardized of the instruction.